7.Make sure your paper has a clean, straight, leading edge. Then open the sprocket covers and fit the first holes of the paper over the sprocket pins.
8.Close the covers. Slide the right sprocket to remove any slack in the paper and lock it in place.
9.To separate the incoming paper from the printed paper, attach the paper guide by holding it horizontally and fitting its notches over the printer’s mounting posts as shown below. Then slide the paper guide toward the front of the printer until you feel it click.
10.Replace the printer cover and close it.
11.Turn on the printer.
12.When using the push tractor, it is a good idea to turn on the Auto tear off feature in Default Setting mode. See “Changing the Printer’s Default Settings” on page 36.
13.Press the LF/FF button to feed the paper to the loading position. When the printer receives data, it begins printing automatically.
Paper Handling | 17 |