When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing.
Note:
Your tear-off position setting remains in effect until you change it, even if you turn off the printer. (If you want to restore the printer’s default tear-off position, you can reset the printer. See page 37 for instructions.)
Printing on Single Sheets
You can load single sheets of paper one at a time using the printer’s paper guide.
Before printing on single-sheet multipart forms, envelopes, or other special paper, make sure the paper thickness lever is set to the appropriate position. See “Printing on Special Paper” on page 29.
Note:
❏Load only one sheet at a time. To load a stack of single-sheet paper, use the optional cut-sheet feeder. See the Reference Guide for more information.
❏You can use the paper guide to load single-sheet carbonless multipart forms that are fastened at the top by line gluing.
❏Insert multipart forms in the paper guide, bound edge first and printable side down.
Follow these steps to load a single sheet:1.If continuous paper is loaded in the push tractor, press the Load/Eject button to feed it back to the standby position.