Manuals / Brands / Computer Equipment / Printer / Epson / Computer Equipment / Printer

Epson LX-300+II Choosing a Place for the Printer, Assembling the Printer

1 50

Download 50 pages, 954.01 Kb

Choosing a Place for the Printer

❏Place the printer on a flat, stable surface.

❏Avoid using or storing the printer in places subject to rapid changes in temperature and humidity. Keep it away from direct sunlight, strong light, heat sources, or excessive moisture or dust.

❏Place the printer near a wall outlet where you can easily unplug the power cord. Position the power cord and interface cable so they do not interfere with paper feeding.

❏Avoid electrical outlets controlled by wall switches or automatic timers. An interruption in power can erase information in the memory of your printer or computer. Also avoid outlets on the same circuit as large motors or other appliances that can cause voltage fluctuations.

❏Use a grounded power outlet; do not use an adapter plug.

Assembling the Printer

1.Make sure the printer is turned off and unplugged.

2. Insert the paper knob.

3.Attach the USB cable holder to the back of the printer as shown below, then lift it up.

8Setting Up the Printer

Contents

Page Page Contents Introduction 1 Setting Up the Printer 2 Paper Handling 3 Using the Control Panel 4 Troubleshooting Purchase supplies and accessories 5 Product Information Introduction Options Page Setting Up the Printer Unpacking the Printer Choosing a Place for the Printer Assembling the Printer Page Page Connecting the Printer USB IEEE1284 (Parallel) RS-232C(Serial) Note: 12Setting Up the Printer Installing the Printer Software For DOS programs Viewing the On-screen Reference Guide Paper Handling Printing on Continuous Paper Printing with the push tractor Page Page Removing a printed document from the push tractor Switching between continuous paper and single sheets Printing with the pull tractor Page Page Adjusting the top-of-formposition LF/FF D Load/Eject U The printer has a minimum and a maximum After you set the Your Advancing paper to the tear-offedge Using the Tear Off button Advancing paper to the tear-offposition automatically Adjusting the tear-offposition Printing on Single Sheets Page Printing on Special Paper Adjusting the paper thickness lever Multipart forms Labels Envelopes Page Using the Control Panel Buttons and Lights 1 Tear Off (Font) lights 2 Tear Off (Font) button 3 LF/FF button 4 Load/Eject button 5 Pause button 6 Paper Out light 7 Pause light Selecting a Built-inFont Changing the Printer’s Default Settings Using Default Setting mode Restoring the printer’s default settings Page Troubleshooting Using the Error Indicators 40Troubleshooting Clearing a Paper Jam Printing a Self Test Page Where To Get Help Internet support Speak to a support representative Purchase supplies and accessories Page Product Information Safety Information Hot Parts Caution Symbol Important Safety Instructions FCC Compliance Statement for United States Users WARNING For Canadian users Declaration of Conformity Epson America, Inc., Limited Warranty What Epson Will Do To Correct Problems: What This Warranty Does Not Cover: