4.Press the LF/FF D button to move the top-of-form position higher on the page, or press the Load/Eject U button to move the top-of-form position lower on the page.
Note:
❏The printer has a minimum and a maximum top-of-form position. If you try to adjust it beyond these limits, the printer beeps and stops moving the paper.
❏When the paper reaches the default top-of-form position, the printer beeps and stops moving the paper briefly. You can use the default position as a reference point when adjusting the top-of-form position.
5.After you set the top-of-form position, press the Pause button to exit the Micro Adjust mode.
Note:
❏Your top-of-form position setting remains in effect until you change it, even if you turn off the printer.
❏The top margin setting made in some software applications overrides the top-of-form position setting you make with the Micro Adjust feature. If necessary, adjust the top-of-form position in your software.
❏If you want to restore the printer’s default top-of-form position, you can reset the printer. See page 37 for instructions.
24Paper Handling