INSTALLATION OF MX-82 F/T
1. Unpacking
Before removing the
1.1 Unpacking steps
Unpacking steps are as follows:
STEP 1. Open the carton.
2.Remove accessories.
3.Remove the
4.Place the Printer with the packing material on a table or any other conven- ient flat surface.
5.Take off the packing materials carefully.
6.Remove the vinyl cover.
1.2Repacking steps
Repacking can be carried out by following the above steps in the reverse order. (Repacking: Shipment for repair, storage, etc.)
NOTE: It is recommended that all original packing materials be saved for reuse in case the
- 1 7 -