FFSW: (Form Feed)
When this switch is depressed once, the paper is advanced vertically to the next Top of Form position. This switch must be depressed while the Printer is
The Top of Form position is initialized when the POWER switch is turned on or when INIT signal is applied to the interface connector. Therefore, before turning the POWER switch on to start operating the Printer, set the paper at the appropriate Top of Form position.
LF SW: (Line Feed)
The paper advances while this switch is being depressed.
The line spacing for paper advancement is determined by ESC A + n code (described later). When the Power switch is turned on, the line spacing is initialized at 1/6 inch.
The line feed operation is prohibited while the Printer is actively engaged in printing.
1.2 Indicators |
|
POWER: | Illuminates while the Printer is receiving AC power. |
READY: | Illuminates when the Printer is ready to receive data. |
PAPER OUT: | Illuminates when the paper supply is near its end. |
ON LINE: | Illuminates when the Printer is in the |