Introduction

Note:

If you don’t have a CD-ROM drive, you can get the printer driver software on diskettes or download it through your modem. See your Getting Started guide for details.

Windows System Requirements

To use your printer and its software with a PC, your system should have:

◗An IBM® compatible PC with at least a 486 DX2/66 MHz or faster processor (Pentium® 100 or equivalent recommended)

◗Windows 3.1x, Windows 95 or later, or Windows NT 4.0

◗At least 16MB of RAM (20MB recommended)

◗At least 50MB of free hard disk space for storing images (100MB recommended)

◗VGA, Super VGA, or better display adapter and monitor

◗Double-speed CD-ROM drive (quad-speed or faster recommended)

◗A shielded, twisted-pair parallel printer cable (6 to 10 feet long) to connect your computer to the printer; the cable

must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics® compatible connector for the printer.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your system should have:

◗Any Macintosh or Power Macintosh model except early models such as the Macintosh Classic, Macintosh +, Macintosh 512, or PowerBook™ 100

◗System 7.1 or later (7.5 or later recommended)

◗At least 16MB of built-in RAM (20MB is recommended)

◗At least 50MB of free hard disk space for storing images (100MB recommended)

◗13-inch RGB or better display

2