Selecting Paper
Recommended Media For Best Results
For ArTainium UV+: TruPix, TruPix Classic or TextPrint
For ChromaBlast: ChromaBlast Media
For further information on selecting the appropriate paper to use with your ArTainium®UV+ and ChromaBlast™ Digital Transfer Inks, please check our website at http://www. sawgrassink.com/support or call your authorized ArTainium®UV+/ChromaBlast™ reseller. While the use of copy paper or other inkjet paper will not harm your printer, the transferred results may be light, splotchy, or uneven. Some papers may even stick to the surface or leave a visible residue.
ArTainium UV+ Heat Transfer (Sublimation) Instructions
Because you can print on a variety of surfaces, you need to take all variables of the surface into account when selecting time, temperature, and pressure. Some of the variables are:
•Thickness of surface.
•Heat absorption; how fast the surface absorbs heat.
•Coatings used on materials to create a receptive surface for sublimation inks. (Ceramics, Metals, Plastics, etc.)
•Accuracy of heat press unit. (Time, Temperature, and Pressure)
The specifics listed below are only guidelines. Due to the differences in heat presses and the various materials you will be printing on, it is not possible to give absolute figures. You should check with your supplier for specific heat transfer instructions or experiment to find your own preferred settings. Practice makes money!
SURFACE/SUBSTRATE
Transfer Time ArTainium UV+
TEMPERATURE
P. S. I.
PRESSURE
REMARKS
CERAMIC | 40 psi | Time varies with pressure. | |||
|
| Use green tile mat for | |||
|
|
|
| ||
|
|
|
| ceramic tile. | |
|
|
|
|
| |
FR PLASTIC | 400oF | 40 psi | Remove Plastic | ||
|
|
|
| Time varies with manufacturer. | |
|
|
|
| (Contact reseller for times and temps.) | |
METAL |
|
|
| Place absorbent sheet on bottom plate | |
60 seconds | 375oF- 400oF | 40 psi | of heat press. Then place transfer | ||
(Other) White, Silver, Gold | paper, face up, on top of absorbent | ||||
|
|
|
| sheet. Next place substrate, face | |
|
|
|
| down, on top of transfer paper. For | |
|
|
|
| best results, remove paper from | |
|
|
|
| substrate immediately after setting. | |
|
|
|
|
| |
METAL | 60 seconds | 400oF | 40 psi | Remove plastic. | |
(Universal | Use absorbent sheet. | ||||
Woods) |
|
|
| ||
|
|
|
| ||
MOUSE PADS | 45 seconds | 400oF | 40 psi |
| |
POLYESTER FABRIC & | 45 seconds | 400oF | 40 psi |
| |
PERFORMANCE APPAREL |
| ||||
|
|
|
| ||
|
|
|
| ||
SOFT L’INK™ | 35 seconds | 400oF | 40 psi | eliminate moisture. Use Teflon | |
sheet between sides of shirt to | |||||
|
|
|
| ||
|
|
|
| prevent “blow through”. | |
|
|
|
|
| |
UNISUB™ PRODUCTS | 400oF | 40 psi | Remove Plastic |
12 | Sawgrass Technologies, Inc. ~ www.sawgrassink.com |
|
