If the diskette in drive A is not formatted, the DISKCOPY program formats it. Then the program begins copying the data from the computer’s memory to the formatted diskette. When it has copied all the files from memory, the screen displays this message:
Insert SOURCE diskette in drive A:
Press any key when ready . . .
5.Remove the copy diskette from the drive and insert the original Startup/ Operating 1 diskette. Press any key.
The program copies the rest of the files from the original diskette to the computer’s memory and then displays this message:
Insert TARGET diskette in drive A:
Press any key when ready . . .
6.Remove the Startup/Operating 1 diskette from drive A and insert the copy diskette in the drive. Then press any key. The program copies the remaining files from the computer’s memory to the copy diskette.
When the copy is complete, you see this prompt:
Copy another diskette (Y/N)?
7.Press Y so you can make a copy of the Operating 2 diskette. Follow the instructions above and the prompts on the screen to copy the Operating 2 diskette.
8.When you finish and the Copy another diskette (Y/N) ?
prompt appears, press Y so you can make a copy of the Reference diskette. Follow the instructions above and the prompts on the screen to copy the Reference diskette.
9.When you finish copying the Reference diskette, press N to return to the
Setting Up Your System |