When you are finished, press 0 and Enter to display the modified DEVICE LIST for a final check. If the list is correct, press Y and Enter. You are now ready to select a test.
Selecting a Test
From the DEVICE LIST, select the device to be tested. Type the number of the device, and then press Enter. The following menu appears:
Number of times to test device
l- Run test one time
2 - Run test multiple times
O- Exit
Enter selection number:
You can specify that the test be performed one time only or any number of times up to 9999. Running a test multiple times is for reliability testing of essential functions only; in most cases running a test only once is sufficient.
To perform the test only once, press 1 then Enter. Depending on the device you have selected, the program may then display a submenu of more detailed tests you can select.
To perform the test multiple times, press 2 and Enter. You see this prompt:
Terminate checking if an error is detected (Y/N)?
Press Y and Enter to terminate checking if the device produces an error, or press N and Enter to repeat the tests regardless of an error. This prompt then appears:
How many times
Type the number of times you want to repeat the test; then press Enter. The tests for the device now start.
Performing System Diagnostics |