Appendix D
Performing System Diagnostics
This appendix describes how to check the operation of the main unit and peripheral devices of your Equity Ie. You check these devices using the diagnostics program on your Reference diskette.
Run the diagnostics program if you are not sure whether a device is performing correctly. The table at the end of this appendix lists the error messages you may see during testing.
Starting System Diagnostics
To start the system diagnostics program, follow these steps:
1.Insert the Reference diskette in drive A.
2.Turn on or reset the computer. The diagnostics program loads automatically and displays the main menu:
OPERATION MENU
1 - System diagnostics
2- Format hard disk
3- Prepare hard disk for moving
0 - Exit to DOS for more utilities Enter selection number:
3. Press 1 to select System diagnostics and then press Enter.
When you start the system diagnostics, the computer checks the system’s configuration. Once this check is completed, the screen displays the DEVICE LIST, a list of the devices available for testing. This list includes only the devices that are installed in the system.
Performing System Diagnostics |