2.Unpack the option card and adjust any of its switches or jumper connections, if necessary. (For example, a memory expansion card usually contains DIP switches that you need to set.) See the instructions that come with the option card.
When you handle the card, be careful not to touch any of the contacts on the circuit board, especially the
Keep the card’s packing materials in case you remove the card later.
3.Position yourself (or the computer) so that you are on the side of the computer with the option slots. You should be facing the gold connector slots inside the computer.
4.Hold the card by the corners opposite the gold metal pins. Make sure the pins point toward the connector slot and the components face up. The card’s metal mounting bracket should be on your left.
Zmtulling Option Cards |