Before you Begin | It is crucial that the OEM ink supplied with your |
| |
| printer is installed before you attempt to install |
| your SubliJet IQ™ inks. This allows for two things: |
| First, it primes the ink delivery system, ensuring |
| that the SubliJet IQ™ ink will load more easily. |
| Second, it familiarizes you with the basic operation |
| of your printer. Please see the EPSON Stylus |
| Photo R800 or R1800 Printer User’s Guide for |
| instructions on installation. |
|
|
Quick Connect II™ Set-up for the R800 & R1800
For more detailed instructions please refer to the Video Installation Guide on your PowerDriverSupra 1800
1.Check to ensure that you have all of the components necessary to setup your Quick Connect II™ system.
Components
1.Ink Cartridge + tubes
2.1 x Long Tube Grip
3.1 x Short Tube Grip
4.Chips
5.8x Ink Bags
6.Small primer bottle
7.Cartridge Cover (R1800 Only)
8.Cartridge placement sticker
9.Rubber Gloves
10.Ink Box
11.Foam Block for R800 only (Not Shown)
12.Power Driver CD (Not Shown)
2.Place the Quick Connect II box on a level surface next to where your printer is going to be placed. For the R800 it should be on the left hand side of the printer with the clamps facing towards the back. For the R1800 it should be on the right hand side with the clamps facing towards the front.
Your ink bags should never be elevated above the print head. Keeping the bags beside the printer at the same level assures the ink delivery system will operate properly.
3. Remove the lid from the box and place it to the side.
