Selecting Paper
For information on selecting the appropriate paper to use with your SubliJet IQ™ inks, please check our website at http://www.sublimation.com/support/ or call your authorized SubliJet reseller. While the use of copy paper or other inkjet paper will not harm your printer, the transferred results may be light, splotchy, or uneven. Some papers may even stick to the surface or leave a visible residue.
Heat Transfer Instructions
Because you can print on a variety of surfaces, you need to take all variables of the surface into account when selecting time, temperature, and pressure. Some of the variables are:
thickness of surface,
how fast the surface absorbs heat,
coatings used on the material to create a receptive surface for sublimation inks (ceramics, metals, etc.),
accuracy of heat press (time, temperature, and pressure).
The information listed below are only guidelines. Due to the differences in heat presses and the various materials you will be printing on, it is not possible to give absolute figures. You should check with your supplier for specific heat transfer instructions or experiment to find your own preferred settings.
| TRANSFER | TRANSFER |
|
|
|
SURFACE | TIME | TIME | TEMP | PRESSURE | REMARKS |
| SUBLIJET | SUBLIJET IQ |
|
|
|
CERAMIC | 350- | 40 psi | Time varies with press, use green | ||
| seconds | seconds | 400oF |
| tile mat for ceramic tile |
FR PLASTIC | 33 seconds | 400oF | 40 psi | Remove Plastic | |
METAL (Other) White, | 40 seconds | 60 seconds | 375oF | 40 psi | Time varies with metal manufacturer |
Silver, Gold |
|
| - 400oF |
| (Contact your reseller for correct |
|
|
|
|
| time and temperature) |
|
|
|
|
| Place absorbent sheet on bottom |
|
|
|
|
| plate of heat press. Then place |
|
|
|
|
| transfer paper face up on top of the |
|
|
|
|
| absorbent. Next place the substrate |
|
|
|
|
| face down on top of the transfer |
|
|
|
|
| paper. Remove paper from |
|
|
|
|
| substrate immediately after |
|
|
|
|
| transferring for best results. |
METAL (Universal | 40 seconds | 60 seconds | 400oF | 40 psi | Use absorbent, remove plastic |
Woods) |
|
|
|
|
|
MOUSEPADS | 25 seconds | 45 seconds | 400oF | 40 psi |
|
POLYESTER FABRIC & | 25 seconds | 45 seconds | 400oF | 40 psi |
|
PERFORMANCE APPAREL |
|
|
|
|
|
SOFT L’INK™ | 25 seconds | 35 seconds | 400oF | 40 psi | Press for 5 secs to eliminate |
|
|
|
|
| moisture, use Teflon sheet between |
|
|
|
|
| sides of shirt to prevent “blow |
|
|
|
|
| through” |
TEC FILM | 210 seconds | 210 seconds | 350oF | 40 psi |
|
UNISUB™ PRODUCTS | 75 seconds | 400oF | 40 psi | Remove Plastic |
