Using the Control Panel Menu 167
/ Setup menu
See “Setup menu” on page 175.
Head
Alignment Auto (Uni-D) Press OK to start printing/alignment.
Auto (Bi-D)
Manual (Uni-D) Press OK to start printing.
Manual (Bi-D)
Cutter
Maintenance Adjust Cut Position –3 to 3 mm
Replace Cutter Press OK to start move.
Menu item Description
Printer Setup Roll Paper
Setup Auto Cut On, Off
Refresh Margin On, Off
Page Line On, Off
Roll Paper
Margin Normal, Top15 mm/Bottom15 mm, Top
35 mm/Bottom 15 mm, Top 45 mm/Bottom
15 mm, 3 mm, 15 mm
Roll Paper
Remaining On, Off
Remaining Alert 1 to 15 m (4 to 50 ft)
Advanced
Settings Roll Paper
Tension Low, Normal, High, Extra High
Less Head
Scuffing On, Off
Drying Time Per
Page 0 to 60 minutes
Paper Size
Check On, Off
Media Skew
Check On, Off
Store Held Job On, Off
Restore Settings Yes, No
Printer Status Firmware Version xxxxxxx,x.xx,xxxx
Option Status Displays the options connected.
Show Total Prints XXXXXXX m2 (XXXXXX ft2)
Print Status Sheet Press OK to start printing.
Menu item Description