Introduction 25
OStore the printer after confirming that the print head has been capped (the print head is
positioned at the far right). If the print head is left uncapped for a long time, the print
quality may decline.
OTo prevent the accumulation of dust and other foreign matter in the printer, close all
covers before placing it in storage.
If the printer will be not be used for an extended period, protect it with an anti-static cloth
or other cover.
The print head nozzles are very small, and they can become clogged easily if fine dust
gets on the print head, and you may not be able to print properly.
OWhen turned on after an extended period of disuse, the printer may automatically
perform head cleaning to ensure print quality.
Head cleaning will end after about 10 to 15 minutes.
Notes on handling ink cartridges
Note the following points when handling ink cartridges to maintain good print quality.
OThe supplied ink cartridges and Maintenance Box are for use during the initial charging.
The supplied ink cartridges and Maintenance Box will be require replacement relatively
quickly.
OStore the ink cartridges at room temperature out of direct sunlight and used before the
expiration date printed on the packaging.
OTo ensure good results, use all the ink in the cartridge within a year of installation.
OInk cartridges that have been stored at low temperatures for an extended period should
be allowed to return to room temperature over a period of four hours.
ODo not touch the IC chips on the sides of ink cartridges. You may not be able to print
properly.
OInstall all ink cartridges into each slot. You cannot print if any of the slots are empty.
ODo not leave the printer without ink cartridges installed. The ink in the printer may dry,
preventing it from printing as expected. Leave ink cartridges in all slots even while you
do not use the printer.
Note:
If the print head is not capped, turn the printer on, and then turn it off.