Introduction 17
Screen View
13 ) button (Feed/Cut Media button)
OThis button is used with roll paper only. If the printer is loaded with cut sheets or poster
board, pressing this button will have no effect.
OIt is used to manually cut roll paper using the built-in cutter.
See “Manual cut method” on page 39.
OIf printing is not currently in progress and the printer is loaded with roll paper, you can
feed paper ahead by pressing first this button and then the d button. Press the u button
to rewind. Keep the d button pressed to feed the paper up to 9.8 feet (3 m). Keep the
ubutton pressed to rewind the paper up to 7.9 inches (20 cm).
When the ubutton is used to rewind roll paper, the paper will pause when the end of
the roll reaches the starting print position. Release the button and then press it again to
resume.
1 Message
Displays the printer’s status, operation, and error messages.
See “What to Do When a Message Is Displayed” on page 204.