Using the Control Panel Menu 177
Printer Setup
(Cont’d) Roll Paper
Setup
(Cont’d)
Remaining
Alert 1 to 15 m (4 to 50 ft) Displayed when On is selected
for Roll Paper Remaining.
Set within a range from 1 to 15 m
(4 to 50 ft) to display a warning
when the amount of remaining
roll paper drops below that limit.
You can set in 0.5 m (1 ft)
increments.
Advanced
Settings Roll Paper
Tension Low Select High or Extra High if the
paper wrinkles during printing.
Roll Paper Tension can be
specified separately for each
paper type using the Custom
Paper Setting option in the Paper
menu.
When Custom Paper is chosen
for Select Paper Type, the printer
will use the value selected for
Roll Paper Tension in the Custom
Paper Setting.
This setting takes effect if no
custom roll paper tension is
specified.
Normal (Default)
High
Extra High
Less Head
Scuffing On If the paper is thick, the print
head may scuff the print surface.
Choose On to prevent scuffing.
This option can be used to
temporarily change the value
selected for Custom Paper
Setting > Platen Gap in the Paper
menu. Note, however, that On
has no effect when Wider is
selected for Platen Gap.
Off (Default)
Drying
Time Per
Page
0 to 60 minutes Specify how long the printer
pauses to allow the ink to dry
after printing each page;
choose from values between 0
and 60 minutes. Depending on
the ink density or paper type, the
ink may take a while to dry. If the
ink blurs on the paper, set a
longer time for drying the ink.
The longer the drying time, the
more time required for printing.
Item Description