Maintenance 197
3. Place the used Maintenance Box in the clear bag included with your new Maintenance
Box, and make sure that the zipper is closed tight.
4. Install the new Maintenance Box.
5. Close the maintenance box cover.
Replacing the Cutter
Replace the cutter when it is not cutting paper cleanly.
Supported cutter
See “Options and Consumable Products” on page 222.
Use a cross-head screwdriver to replace the cutter. Make sure you have a cross-head
screwdriver with you before replacing the cutter.
Important:
Do not touch the IC chip on the side of Maintenance Box. Doing so may prevent
normal operation and printing.
Important:
Take care not to damage the cutter blade. Dropping it or knocking it against hard objects may
chip the blade.