The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding with installation under Windows PC.
Select A Desired Protocol
The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol Installation” section in this chapter.
Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print server” section later in this chapter.
The
The NetBEUI protocol must be installed. For further information, please read “NetBEUI Protocol Installation” section in this chapter.
1.Click Start, point to Settings and select Control Panel.
2.Double click the Network icon.
3.If the TCP/IP Protocol is not already installed, click Add.
4.Select Protocol and click Add.
5.Select Microsoft from the Manufacturers list.
6.Select TCP/IP Protocol from the Network Protocols list.
7.Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address automatically”, if a DHCP server is available on the LAN.
8.Restart the computer.
9.Done.
Note: Using TCP/IP protocol to access the print server requires