7. Now, you can find your printer’s icon and you can use the SMB printing mode.
1.Verify the power of print server is turned on.
2.Press the reset button once, and then release it.
WARNING: This will restart the print server and stop all
1.Disconnect the external power adapter.
2.Hold down the reset button.
3.Reconnect the external reset button. Wait about 5~6 seconds.
4.Release the reset button.
5.The print server will restart.
WARNING: This will erase all settings of print server to default and should be performed with caution!
After performing a factory default, the default settings will be:
DHCP client: off
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0