Registering and deleting projectors for monitoring
f Procedures for registration
4 Select the projector(s) to be registered, and then click [Edit].
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display name Enter the name of the projector(s) to be displayed in "Grouping view" or "Detail list view".
Up to a maximum of 32 bytes can be entered. A space cannot be used as the first character.
Display icon Select the icon(s) to be displayed in "Grouping view" or "Detail list view".
Parent group Select when registering a projector in a group. If no groups have been created, this cannot be selected. s"Registering several projectors to a monitoring group all at once" p.13
|
| 11 | |
|
|
|
|
|
|
| |
Projector | This shows the name that has been registered on the |
| |
name | projector. |
| |
|
|
| |
IP address | This shows the IP address for the registered projector. |
| |
|
|
| |
Use Serial⇔ | This cannot be selected when registering projectors | ||
TCP/IP | using automatic search. | ||
conversion |
|
|
|
adaptor. |
|
|
|
|
|
| |
Port Number | This cannot be selected when registering projectors | ||
| using automatic search. | ||
|
|
| |
Monitor | If a Monitor Password has been set for the projector, | ||
Password | be sure to enter the Monitor Password that has been | ||
| set. If the correct password is not entered at this time, | ||
| it will not be possible to monitor and control the | ||
| projector even though it is registered. | ||
|
|
| |
Description | You can enter some kind of memo about the projector. | ||
| The details you enter here will be displayed at the | ||
| projector properties. | ||
| Up to a maximum of 60 bytes can be entered. | ||
|
| Monitor | Select this when you want monitoring to start. | ||
|
|
|
|
|
|
|
|
|
|
|
|
5 | After entering the details, click [Register] to start the | ||||
|
| registration. When the message is displayed, click | |||
[OK].
To continue registering other projector(s), repeat Steps 4 and 5.
6 To end the registration operation, click 
in the top- right corner of the window or click [Cancel].
The icon(s) of the projector(s) you registered will be displayed in "Grouping view" or "Detail list view".
Refer to "Monitoring window layout" for details on using the "Grouping view" and "Detail list view". sp.17