Monitoring window layout

18

 

 

The icon patterns and their meanings are explained below.

Group

No warnings or problems

All projectors in the group are normal.

Warning or problem

A projector in the group has a warning or problem status.

Notification

A projector requiring immediate attention has been detected within the group.

Monitoring disabled

The projector is not being monitored. If you right- click the icon and select "Monitoring enabled", the projector will be added to the projectors that are being monitored.

Data being updated

Projector

No warnings or problems*1

Warning or problem

Notification

Monitoring disabled

Data being updated

Network error (monitor password authentication error)

No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. sp.9, 11, 13

Network error (TCP connection error)*2

Network error (ESC/VP.net communication error)*3

*1 When "Temperature level display group view" is set to "On" at "Environment setup" in the "Tool" menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is "Off". As you can get an idea of how the temperature inside the projector is increasing when the internal temperature level is displayed, you can make improvements to the projector's operating environment before a high internal temperature alarm occurs or the temperature becomes abnormally hot. sp.23

*2 Check the following items.

•Check that the projector's power is turned on.

•Check that the LAN cable is connected.

•Check that "Network Monitoring" is set to "ON" or "Standby Mode"

is set to "Network ON" in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

TIP

The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click [Refresh] in the main window to update the status.

f Using the icons in "Grouping view"

The following icon operations can be carried out in "Grouping view".

•Expanding and collapsing icons

Each time you double-click a group icon, the icons for the projector that have been registered in that group are displayed or hidden.

•Moving icons

To change the position of an icon within "Grouping view", simply drag and drop the icon to be moved.