Operating environment

6

 

 

Limitations imposed by a Windows Vista environment

When using EMP Monitor under Windows Vista, note the following limitations.

•You must have administrator authority in order to use "Register at startup" on the "Environment setup" screen of EMP monitor. s"Monitoring using the system tray" p.22

•Even after EMP monitor has been uninstalled, the settings and log information will remain on the hard disk. If this information is no longer required, you may delete the "EMP Monitor V4.22" folder. Provided the default settings were used at installation, this folder can be found at: "C:\Users\(User Name)\AppData\Local\VirtualStore\Program Files\EPSON Projector\EMP Monitor V4.22"

Before starting operations

Check the following points before starting up EMP Monitor.

•EMP Monitor must be installed on the computer to be used for monitoring and control.

•The computer and the projectors must be connected to the network.

•If using Windows 2000, Windows NT4.0, Windows XP, or Windows Vista, the computer must be started up in Administrator mode.

•For some projectors, a commercially-available serial ⇔ TCP/IP conversion adapter and a connection cable are required in order to use EMP Monitor.

•If you are using a serial ⇔ TCP/IP conversion adapter, make the settings for the adapter before connecting to the projector.