Using the control functions | 28 | |
|
|
Carrying out control using timer settings
This is useful for carrying out certain control operations such as turning a projector's power on and off at specified times every day or every week. Timer settings can be carried out either for a single projector only, or all at once for all projectors in a group.
PROCEDURE
1 Select "Timer" - "Timer Settings" from the "Tool" menu.
The following window will be displayed and you can then check the timer setting status.
The details that can be checked and operations that can be carried out at this time are given below.
Projectors | Selects a group or projector to check the status of. | ||
When a group is selected, the timer setting statuses for | |||
| all projectors in that group are displayed. | ||
|
| ||
| Shows the current day in a red box. | ||
Date | Days for which timer settings have been made are shown | ||
in bold. |
|
| |
| Click | or | to switch to the calendar for the |
| previous or next month. | ||
|
| ||
Timers | Shows a list of the timer settings. | ||
|
| ||
[Enabled] | Switches the timer settings that have been selected from | ||
[Disabled] | the timer list between enabled and disabled. | ||
|
| ||
[Add] | Registers new timer settings. | ||
[Edit]
Lets you change the timer settings that have been selected from the timer list.
If a group has been selected for status checking, the settings cannot be changed.
The colours in the lines of the list have the following meanings:
: Current day's timer setting
: When some of the projectors in the group have timer setting enabled and others have it disabled for the current day's timer setting
: When the current day's timer setting is a disabled setting
: Timer setting for a day other than the current day
[Delete]
Lets you delete timer settings that have been selected from the timer list.