Tasks that can be done using EMP Monitor

4

 

EMP Monitor lets you carry out operations such as checking the statuses of multiple EPSON projectors that are connected to a network at a computer monitor, and controlling the projectors from the computer.

Following are brief descriptions of the monitoring and control functions that can be carried out using EMP Monitor.

•Registering projectors for monitoring and control

-Projectors on the network can be searched for automatically, and you can then select projectors to be registered from the projectors that are detected.

-You can enter the IP addresses for target projectors to register them.

•Registered projectors can also be assigned to groups so that they can be monitored and controlled in groups

•Monitoring the statuses of registered projectors

-The power status (ON/OFF) for projectors and problems or warnings requiring attention can be checked visually by means of icons.

-You can select groups of projectors or a single projector that you are interested in, and then check the cumulative lamp operating time or the details of information such as input sources, problems, and warnings for these projectors.

•Controlling registered projectors

-Projectors can be selected in groups or as single projectors, and you can then carry out operations for the selected projectors such as turning the power on and off and switching their input sources.

-Web control functions can be used to change the settings in the projector's configuration menu.

-If there are certain control actions which are carried out regularly at particular times or on particular days, you can use "Timer Settings" to register timer settings.

•E-mail notification function settings

You can set e-mail addresses to which notifications are sent if a status requiring attention, such as a problem, occurs with a projector that has been registered.

Group A

I want to turn on the power for Group A projectors.

Projector A

 

 

Group B

Projector B

EMP Monitor

 

System configuration example

TIP

To enable projectors to be monitored and controlled even when they are in standby mode*, make the following settings at the projectors. The settings that need to be made will vary depending on the projector you are using. See your User’s Guide for more information.

•Set "Network Monitoring" to "ON".

•Set "Standby Mode" to "Network ON".

* When the projector's (Power) indicator is lit orange