Monitoring window layout | 20 | |
|
|
Error information: Shows a notification or warning/problem status
using the following icons.
TIP
Clean Air Filter Notice
Replace Lamp*4
Replace Air Filter
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Low air flow error
Air filter air flow sensor error
Lamp Cover Open
Lamp Error
Lamp failure at power on
High internal temperature error
Internal Error
Fan error
Sensor error
Supply System Error (Ballast)
Auto Iris Error
Other error
•The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click [Refresh] in the main window to update the status.
•Detectable error information differs with the projector you are using.
f Selecting display items
You can select only the required items to be displayed in "Detail list view".
PROCEDURE
1 Select "Option" from the "View" menu.
The "Option" window will be displayed.
*1 When "Temperature level display group view" is set to "On" at "Environment setup" in the "Tool" menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is "Off".
*2 Check the following items.
•Check that the projector's power is turned on.
•Check that the LAN cable is connected.
•Check that "Network Monitoring" is set to "ON" or "Standby Mode" is set to "Network ON" in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network. *4 You can display the "Replace Lamp" warning at any time preset in
"Environment setup" in the "Tool" menu.