Registering and deleting projectors for monitoring
Registration by specifying an IP address (Manual registration)
PROCEDURE
1
The following window will be displayed.
•If "Detail list view" is displayed, select "New" - "Projector (manual registration)" from the "Edit" menu.
TIP
12
2 Enter the IP address of the projector to be registered in the "IP address" box and then click [Search]. When the message is displayed, click [OK].
•If using a serial ⇔ TCP/IP conversion adapter and cable to connect the projector, select "Use Serial ⇔ TCP/IP conversion adaptor". Enter the port number in "Port Number" and then click [Search].
3 After searching is complete, enter the information for the projector to be registered while referring to the table below.
Display name | Enter the name of the projector(s) to be displayed in |
| "Grouping view" or "Detail list view". |
| Up to a maximum of 32 bytes can be entered. |
| A space cannot be used as the first character. |
|
|
Display icon | Select the icon(s) to be displayed in "Grouping view" |
| or "Detail list view". |
|
|
Parent group | Select when registering a projector in a group. |
| If no groups have been created, this cannot be |
| selected. s"Registering several projectors to a |
| |
|
|
Projector | This shows the name that has been registered on the |
name | projector. |
|
|
IP address | This shows the IP address that you entered in step 2. |
|
|
Use Serial ⇔ | Select this if using a serial ⇔ TCP/IP conversion |
TCP/IP | adapter to connect the projector. |
conversion |
|
adaptor. |
|
|
|
Port Number | If using a serial ⇔ TCP/IP conversion adapter to |
| connect the projector, enter the port number. |
|
|
You can also carry out this operation by selecting "Projector (manual registration)" from "New" in the "Edit" menu.