Application lock function | 33 |
|
You can use the application lock to prevent third parties from operating the projectors using EMP Monitor and from changing settings without authority. Opening and closing EMP Monitor and status monitoring can still be carried out even when the application lock is applied.
In addition, when a password has been set, the password must be entered in order to cancel the application lock. This ensures that the application lock can not be easily cancelled, and thus improves system security.
2 The password entry window will be displayed, so enter the set password and then click [OK].
If no password has been set (default setting), click [OK] without entering a password. It is recommended that you enter a password in order to strengthen security.
The application lock will be cancelled and operations can be carried out as normal.
Switching application lock between enabled and disabled
f Enabling the lock
PROCEDURE
Select "Application lock" from the "Tool" menu.
The application lock will be enabled and no operations will be possible other than opening and closing EMP Monitor and disabling the application lock.
f Disabling the lock
PROCEDURE
1 Select "Application unlock" from the "Tool" menu.
Setting a password for cancelling application lock
Carry out the following operations while application lock is cancelled.
PROCEDURE
1 Select "Environment setup" from the "Tool" menu.
The "Environment setup" window will be displayed.
2 | Select "Change the application lock password". | ||
|
|
|
|
|
|
|
|
3 | Enter the password in both the "New password" and | ||
| "New password (confirm)" boxes and then click [OK]. | ||
The password can be up to 16 bytes in length.