Registering and deleting projectors for monitoring
PROCEDURE
1
The following window will be displayed.
Make the necessary settings while referring to the table below.
•If "Detail list view" is displayed, select "New" - "Group" from the "Edit" menu.
Group name | Enter the name of the group(s) to be displayed in |
| "Grouping view" or "Detail list view". |
| Up to a maximum of 32 bytes can be entered. |
| A space cannot be used as the first character. |
|
|
Display icon | Select the icon(s) to be displayed in "Grouping view" |
| or "Detail list view". |
|
|
Parent group | This selects the parent group. If no groups have been |
| created, this cannot be selected. |
|
|
Monitor | Select this to monitor all projectors that have been |
| registered in the group. If this is not selected, the |
| settings made when the individual projectors were |
| registered will be used. |
| It cannot be set when creating a new group. |
|
|
14
TIP
You can also carry out this operation by selecting "Group" from "New" in the "Edit" menu.
2 After entering the details, click [Register] to start the registration. When the message is displayed, click [OK].
The icon(s) of the projector(s) you registered will be displayed in "Grouping view" or "Detail list view".
3
TIP
You can also carry out this operation by selecting "Edit" from the "Edit" menu.
4 In the "Edit projector" window, select the group name to use for registering in "Parent group" and then click [Change].
The status of the group registration will be displayed as an icon in "Grouping view" or "Detail list view".
TIP
The registration details can also be checked using "Projector list" in the "View" menu.