Esoteric AZ-1 Muting, Display dimming

Muting

To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound.

<While muting is engaged, “MUTING” and the name of the selected terminal alternately blink on the display.

Display dimming

The display on the main unit can be dimmed to suit the environment in which you listen to music. There are three levels and an “off” setting.

Use the DIMMER button to cycle between these settings.

<Note that the OFF setting is not memorized when the power is turned off. When the unit is switched off with the display off, and then turned on again, the display is reset to the minimum brightness.

<In OFF mode, when you press a button such as VOLUME, the illuminations turn temporarily on.

Contents

Page IMPORTANT SAFETY INSTRUCTIONS For U.S.A Contents Before Use What’s in the box Read this before operation Maintenance Short Circuit and Output Protection Speaker Connections Connection using speaker cables with banana plugs Connection using speaker cables with spades or bare wire Connections ADigital audio input terminals [DIGITAL IN] BAnalog audio input terminals [LINE IN] CSIGNAL GND connection DWORD SYNC output terminal EPower cord receptacle i.LINK (IEEE 1394) Copyright protection system DTCP Data transfer rate Flow rate control How to connect multiple i.LINK-capabledevices Remote Control Unit How to insert the batteries Restoring factory settings Front panel features Front Panel Display Understanding the remote control unit Basic Operation To turn the unit off (standby) Muting Display dimming Word sync W_OUT WORD OFF Basic Settings W_OUT (Word sync output frequency) CH (Channel) i_RC (i.LINK remote control function) (Normal display) Gain Setting for Analog Audio Input Name and skip setting of the INPUT knob Troubleshooting For European customers Disposal of your old appliance Specifications