Name and skip setting of the INPUT knob

INPUT SETUP

The names of the inputs shown on the display can be changed. You can also set the INPUT knob to skip the input terminals that are not in use.

For example, if a CD player is connected to the COAX1 terminal and a DVD player to the OPT1 terminal, you can change the name of COAX1

Example:

When a CD player is connected to the COAX1 terminal and a DVD player to the OPT1 terminal

Select “CD” for COAX1

Select “DVD” for OPT1

Select “*skip” for other terminals.

Then only “CD” or “DVD” will appear on the display when you turn the INPUT knob.

1Press and hold the SETUP button for more than 2 seconds.

The unit enters setup mode, and “L-1>***” appears on the display. (*** changes depending on your setting.)

If the INPUT knob is set to LINE1, LINE2 or

LINE3/PHONO, “GainL*>***” will appear instead of “L- 1>***”. In this case, lightly press the SETUP button again to show “L-1>***”.

If you leave the unit idle for 10 seconds, the setup mode will be cancelled.

2Repeatedly press the SETUP button to select the input terminal to be changed.

L-1(LINE1) q L-2(LINE2) q L-3(LINE3)

q i-L(i.LINK) q C-1(COAX1) q C-2(COAX2) q O-1(OPT1) q O-2(OPT2) q (normal display) q L-1(LINE1) q ...

3Turn the INPUT knob to change the setting.

Default name, CD, SACD, DVD, TUNER, MD, CD-R, TAPE, PHONO, MP3, TV, SAT, CATV, DVD-R, VCR, *skip

<The default name of the LINE3 terminal depends on the LINE3/PHONO switch.

When the LINE/PHONO switch is set to LINE, the default name is “LINE3”. When the LINE/PHONO switch is set to PHONO, the default name is “PHONO”.

<The name of the i.LINK terminal cannot be changed, as the display always shows model name of the connected device. Only “*skip” is selectable for i.LINK.

<Skip function will not work at all if you set all the input terminals to “*skip”.

4Press and hold the SETUP button for more than 2 seconds (or leave the unit idle for 10 seconds) to exit the setup mode.

<Settings are stored even when power is turned off and the unit is unplugged. If left unplugged for an extended period, the settings may be lost.

17