A_DF (Digital Filter)
Turns on or off the digital filter.
ON
Upconverts the signal up to 8x before D/A conversion. This setting produces a crisp sound with a solid feel.
OFF
Does not upconvert the signal. This setting produces a rich and natural sound.
HDMI (HDMI video output format)
Selects an HDMI video output format.
| 480i (NTSC) or 576i (PAL) |
| |
|
| ||
| z | ||
480p (NTSC) or 576p (PAL) | |||
| z | ||
(HDMI: ON) | 720p | ||
z | |||
| 1080i | ||
| z | ||
| 1080p | ||
| z | ||
| Auto | ||
| z | ||
| OFF (HDMI: OFF) |
|
|
|
|
| |
(i=interlaced, p=progressive scan) | ENGLISH | |
Select “Auto” when the unit is connected to a device with an | ||
| ||
HDMI terminal. The format recommended by the receiving |
| |
side is automatically selected. |
| |
The format is automatically set to “1080p” when “Auto” is |
| |
selected and when the unit is connected to a device using an |
| |
|
<When this HDMI output is turned on, even if progressive scan has been selected for the component video outputs, an interlaced signal is output from the COMPONENT VIDEO terminals.
<You can use the HDMI button on the remote control unit to turn ON (the currently selected format) or OFF the HDMI video output.
<You can also use the remote control unit to change the setting.
Press the HDMI button to turn the HDMI video output ON. While the front panel’s display shows “HDMI>”, use the cursor button (up or down) to change the setting.
HDMI
Cursor
31
