VERTICAL
PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provided for your convenience.
1.Sélecteur de mode silencieux/normal
2.Bouton d’alimentation On/Off
3.Dispositif de surveillance du filtre
4.Compartiment de rangement de l’électrobrosse
5.Bouton de relâche de la coupelle
6.Poignée de la coupelle à poussière
7.Coupelle à poussière
8.Plaque du filtre d’échappement
9.Phare
10.Sélecteur
11.Témoins à DEL
12.Sélecteur de hauteur de tapis
13.Tube télescopique
14.Poignée du boyau souple
15.Plumeau autonettoyant
16.Électrobrosse
17.
18.Boyau souple
19.Poignée de l’aspirateur
20.
21.Cordon d’alimentation
22.Relâche de la poignée
23.Brosse à épousseter
24.Brosse à meubles
25.Suceur plat
PROBLEM |
| POSSIBLE CAUSE |
| POSSIBLE SOLUTION | |
|
|
|
|
| |
| 1. | Not properly plugged into | 1. | Plug in firmly. | |
|
| wall outlet. | |||
Cleaner Won’t |
| 2. Reset circuit breaker or replace | |||
2. No electricity in wall outlet. | |||||
| fuse. | ||||
Run | 3. On/Off switch not turned |
| |||
3. Push on/off switch to on | |||||
|
| on. | |||
|
| 4. | Reset motor thermostat. | ||
| 4. | Motor thermostat tripped. | |||
|
|
| |||
|
|
|
|
| |
| 1. | Full or clogged dust cup. |
|
| |
| 2. | Wrong pile height setting. | 1. | Clean dust cup. | |
| 3. | Clogged nozzle or dust | 2. | Adjust setting. | |
|
| inlet port. | 3. | Remove obstruction. | |
Cleaner Won't | 4. | Clogged hose. | 4. | Remove obstruction. | |
5. | Broken belt(s). | 5. | Replace belt(s). | ||
Pick Up | 6. | Hose not inserted fully. | 6. | Push hose in securely. | |
| 7. | Dirty filters. | 7. | Clean / change filters | |
| 8. | HEPA filter needs | 8. | Clean or replace HEPA Filter or | |
|
| cleaning or replacing. |
| filter frame. | |
| 9. | Debris screen needs | 9. | Clean debris screen. | |
|
| cleaning. |
|
| |
|
|
|
|
| |
Cleaner Picks |
|
|
|
| |
Up Moveable |
|
|
|
| |
Rugs Or | 1. Wrong pile height setting. 1. Adjust setting. | ||||
Pushes Too |
|
|
|
| |
Hard |
|
|
|
| |
Agitator Does | 1. | Broken belt(s). | 1. | Replace belt(s). | |
2. | Belt(s) installed | ||||
Not Turn | 2. | Check belt changing. | |||
| incorrectly. | ||||
|
|
|
| ||
|
|
|
|
| |
Air Driven | 1. | Rotating brush, turbine or |
|
| |
Turbo Brush |
| elbow obstructed. | 1. | Clear obstructions. | |
Does Not | 2. | Belt broken. | 2. | Call | |
Rotate Or | 3. | Hose obstructed. | 3. | Clear obstruction. | |
Rotates | 4. | HEPA filter or debris | 4. | Clean HEPA filter or debris screen. | |
Slowly |
| screen clogged. |
|
| |
|
|
|
|
| |
Air Flow |
|
|
|
| |
Restricted | 1. | Attachment use restricts |
|
| |
With |
| air flow. | 1. | Check attachment. | |
Attachment | 2. | New carpet debris | 2. | Remove obstruction. | |
Use Sound |
| clogging air path. |
|
| |
Changes |
|
|
|
| |
Spécifications techniques
Tension : | 120 V, 60 Hz |
Intensité : | 12 A |
Avertissement : Les illustrations peuvent différer de l’appareil
31 | 12 |
