EVGA 122-M2-NF59-AX manual Pwrled, Speak, Jw Fp

Speaker connector: SPEAK

This 4-pin connector connects to the case-mounted speaker. See the figure below.

Power LED: PWR LED

The Power LED is light on while the system power is on. Connect the Power LED from the system case to this pin.

IDE Activity LED: HD LED

This connector connects to the hard disk activity indicator light on the case.

Reset switch lead: RESET

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting in order to prolong the lift of the system’s power supply. See the figure below.

Power switch: PWR BTN

This 2-pin connector connects to the case-mounted power switch to power ON/ OFF the system.

PWRLED

Pin 1

SPEAK

Pin 1

VCC5

GND

NC

SPKR

PWR LED			PWRBTN
VCC5	PWRLED	PWRBTN	GND
JW FP
Pin 1
VCC5	HDDLE	GND	RSTSW NC

HDLED

System Case Connections

RESET

EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821 Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501

Page 24