EVGA 122-M2-NF59-AX Advanced Bios Features Removable Device Priority, Hard Disk Boot Priority

Advanced BIOS Features

Removable Device Priority

This option is used to select the priority for Removable device startup. After pressing <Enter>, you can select the removable device using the <PageUp>/<PageDn> are arrow keys, and change the removable device priority using <+> or <->.

Hard Disk Boot Priority

This option is used to select the priority for HDD startup. After pressing <Enter>, you can select the HDD using the <PageUp>/<PageDn> are arrow keys, and change the HDD priority using <+> or <->.

Network Boot Priority

This option is used to select the priority for Network startup. After pressing <Enter>, you can select the Network using the <PageUp>/<PageDn> are arrow keys, and change the Network priority using <+> or <->.

CPU Internal Cache

This option enables or disables the CPU internal caches.

Quick Power On Self Test

Enable to reduce the time for power on self test

First/Second/Third Boot Device

This option allows you to set the boot device’s sequence.

Boot Other Device

With this function set to enable, the system will boot from some other devices if the first/ second/thrist boot devices failed.

Boot Up NumLock Status

This item defines if the keyboard Num Lock key is active when your system is started.

Security Option

When it is set to “Setup”, a password is required to enter the CMOS Setup screen; When it is set to “System”, a password is required not only to enter CMOS setup, but also to

start up your PC.

APIC Mode

This option is used to enabled or disable APIC function.

MPS Version Control for OS

This option is used to setup the version of MPS Table used in NT4.0 OS.

Full Screen Logo Show

This option allows you to enabled or disable to full-screen logo.

EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821

Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501

Page 31