EVGA 122-M2-NF59-AX manual Init Display First, Reset Configuration Data, Resources Controlled by

Init Display First

This option is used to set which display device will be used first when your PC starts up.

Reset Configuration Data

This option is used to set whether the system is permitted to automatically distribute IRQ, DMA, and I/O addresses each time the machine is turned on.

Resources Controlled by

Use this option to determine if IRQ resources are automatically assigned or manually assigned

IRQ Resources

Press <Enter> to manually assign IRQ resources.

PCI/VGA Pallette Snoop

If you use a non-standard VGA card, use this option to solve graphic acceleration card or MPEG audio card problems (e.g. colors not accurately displayed).

Maximum Payload Size

This option is ued to set maximum TLP payload size for PCI Express devices.

Maximum ASPM

Enable/Disable Advance State Power Management

System Monitor

The “System Monitor” screen displays real-time temperatures, voltages, and fan speeds.

EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821

Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501

Page 40