Operation
Product Overview | Operation |
Figure 4
1. | Rollover Protection | 5. | Motion control levers |
| System (ROPS) |
|
|
2. | Engine Controls (right | 6. | Parking brake |
| console) |
|
|
3. | Seat belt | 7. | Height of cut adjustment |
4.Fuel cap
Note: Determine the left and right sides of the machine from the normal operating position.
Controls
Motion Control Levers
The motion control levers located on each side of the console control the forward and reverse motion of the machine.
Moving the levers forward or backward turns the wheel on the same side forward or reverse respectively. Wheel speed is proportional to the amount the lever is moved.
Moving the levers outward from the center position into the
Figure 5
1. | Neutral lock position | 4. | Forward |
| (handles out) |
|
|
2. | Neutral operate position | 5. | Neutral (operate) |
| (handles in) |
|
|
3. | Front of unit | 6. | Reverse |
|
|
|
|
Choke Control
Located on right console (black lever) (see Figure 6).
The choke is used to aid in starting a cold engine. Moving the choke lever forward will put the choke in the “ON” position and moving the choke lever to the
18
