Manuals / Exmark / Lawn and Garden / Lawn Mower

Exmark Lazer ZXS Specifications, Model Number, Engine, Fuel System, Safety Interlock System, Deck

Models: Lazer ZXS

1 44

Download 44 pages 10.43 Kb

Page 14

2.SPECIFICATIONS

2.SPECIFICATIONS

2.1MODEL NUMBER:

M15KA322P; M15KA362P; M15KA483P; M15KA362; M15KA483

2.2ENGINE

2.2.1Engine Specifications: See your engine owner's manual.

2.2.2RPM (No Load): 3600 rpm

2.3FUEL SYSTEM

2.3.1Capacity: 5 gal. (18.9 liter)

2.3.2Type of Fuel: Use only clean, fresh, regular grade, unleaded gasoline with the pump sticker octane rating of 87 or higher. In countries using the research method, it should be 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut Off Valve: in-line, 1/4 turn

2.4SAFETY INTERLOCK SYSTEM

Operator must have the transmission in neutral and PTO disengaged to start engine. Release of Operator Presence Control (OPC) levers will cause engine to stop if transmission is not in neutral and/or PTO is engaged.

2.5STEERING/BRAKE CONTROL

Fingertip drive control levers provide independent control of traction, braking, and neutral to each drive wheel for moving, stopping, and power turning. Parking brakes are engaged by locking drive control levers in the “brake” position.

2.6TRANSMISSION

2.6.1Peerless 700-070A, five speeds forward and one reverse.

2.6.2 Speed range: 1st	2.0 mph (3.22 km/h)	4th	4.1 mph (6.60 km/h)
2nd	2.7 mph (4.35 km/h)	5th	6.2 mph (9.98 km/h)
3rd	3.5 mph (5.63 km/h)	Rev	3.1 mph (4.99 km/h)

2.7WHEEL DRIVE SYSTEM

Banded double A-Section V-belts, single top-side idlers and replaceable bolt-on drive sheaves and brake drums. (Single B-Section V-belts for the 32" Model)

2.8 TIRES

	Drive
	Pneumatic (Air-Filled)
Deck Size	32”	36” & 48”
Size	13 x 5.0-6	13 x 6.5-6
Quantity	2	2
Tread	Turf Saver	Turf Master
Ply Rating	4	4
Pressure	14 psi (97 kPa)	14 psi (97 kPa)
Bearings	Replaceable Ball	Replaceable Ball

Front Caster

Semi-Pneumatic

All Decks

9x 3.50-4 2

Smooth

Replaceable Roller

2.9 DECK

2.9.1	Cutting Width: Model 32	31.75 in. (80.7 cm)
	Model 36	35.38 in. (89.9 cm)
	Model 48	47.25 in. (120.0 cm)
2.9.2	Discharge: Right Side
		- 9 -

Image 14

Exmark Lazer ZXS Specifications, Model Number, Engine, Fuel System, Safety Interlock System, Steering/Brake Control, Tires

Contents

For Serial Nos 600,000 & Higher Part No. 103-9911 Rev. APage How the Program Works EXMARK PARTS PLUS→ PROGRAMEFFECTIVE DATE September 1 Program OPERATORS MANUAL 2. SPECIFICATIONS TABLE OF CONTENTS1. SAFETY 4. MAINTENANCE & ADJUSTMENTSATTENTION! BECOME ALERT YOUR SAFETY IS INVOLVED 1. SAFETY1.1 SAFETY ALERT SYMBOL 1.2 TRAININGDANGER DANGER 1.4 OPERATIONDANGER c Before making height adjustments 1.4.5 Use EXTREME caution when backing up. LOOK BEHIND YOUa Before checking, cleaning, or working on the mower c When parking inside a building1.6 RIDING ATTACHMENTS 1.5 MAINTENANCE AND STORAGE1.7 SAFETY SIGNS LOCATION 48” Decks Under Belt Shield HousingLOCATION 32” & 36” Decks Under Belt ShieldLOCATION Console Pistol Grip Handle Units LOCATION Right Rear of Engine Deck Pistol Grip Handle UnitsLOCATION Upper Handles Both Sides ECS Handle Units LOCATION Console2.1 MODEL NUMBER 2. SPECIFICATIONS2.4 SAFETY INTERLOCK SYSTEM 2.2 ENGINE2.11 TORQUE REQUIREMENTS 3. OPERATION INSTRUCTIONS2.10 DIMENSIONS 3.1 CONTROLSECS HANDLE NEUTRAL LOCK/PARK BRAKE LATCH Apply parking brakes whenever leaving the operators positionPISTOL GRIP HANDLE NEUTRAL LOCK/PARK BRAKE LATCH 3.2 PRE-START NOTE Kawasaki engines generally need to be choked even when warm 3.3 OPERATING INSTRUCTIONSDRIVE LEVER, NEUTRAL LOCK/PARK BRAKE OPERATION DRIVE LEVER, NEUTRAL LOCK/PARK BRAKE LATCH OPERATION DANGERab cd Do not rely solely on the parking brake to hold machine on trailer DANGER3.4 TRANSPORTING Service Interval See Engine Owners Manual 4. MAINTENANCE AND ADJUSTMENTS4.1 PERIODIC MAINTENANCE Service Interval Daily Service Interval DailyBLADE BOLT INSTALLATION 102-115 N-mPISTOL GRIP HANDLES DRIVE LEVER HARDWARE LOCATION Service Interval DailyFor Pistol Grip Handles For ECS Handles ECS HANDLE DRIVE LEVER SETTINGPISTOL GRIP HANDLES NEUTRAL LOCK LEVER CLEARANCE Service Interval See Engine Owners Manual ECS HANDLE DRIVE LEVER LINKAGE INSTALLATIONService Interval Daily Service Interval See Engine Owners ManualService Interval Refer to Chart Service Interval 160 hrsService Interval 40 hrs Service Interval As Required LUBRICATION CHARTSPRAY LUBRICANT CHART Service Interval See Engine Owners Manual4.2 ADJUSTMENTS CASTER HEIGHT ADJUSTMENT NUMBER OF 1/4 BLADE SPACERS CUTTING HEIGHT ADJUSTMENT 1 to 4 1/4AXLE BELOW SPINDLEMOWER DECK BELT ADJUSTMENT 48” Deck Shown for Reference OnlyNOTE These drawings are viewed from underneath the engine deck BLADE BRAKE ADJUSTMENT3-5 mm SHIFTER LEVER TO TRANSMISSION UPPER HANDLE HEIGHT ADJUSTMENT 6. TROUBLE SHOOTING5. WASTE DISPOSAL DRIVE BELT TENSION ADJUSTMENT POSITIONSNote Different pressures may make mower cut unevenly ENGINE TROUBLESHOOTING6.3 BLADES DO NOT STOP WHEN DISENGAGED 6.2 MOWER CUTS UNEVENLY7. MOWER DECK BELT ROUTING 8. WIRING DIAGRAMENGINE TROUBLESHOOTING TABLE 32 and 36 MOWER DECKConditions and Products Covered 9.2-Year Limited Warranty Exmark Turf EquipmentInstructions for Obtaining Warranty Service Items and Conditions Not CoveredOwner’s Warranty Responsibilities 10. Evaporative Emission Control Warranty StatementManufacturer’s Warranty Coverage Defects Warranty RequirementsPage Page Date SERVICE RECORDService Done By Description of Work DoneT H I S I S A 1 0 S L O P E T H I S I S AS L O P E FOLD ALONG APPROPRIATE LINEWALK BEHIND ACCESSORIES SEE EXMARK’S COMPLETE LINE OF ACCESSORIESRIDING ACCESSORIES