Exmark Lazer ZXS manual Operation Instructions, Dimensions, Torque Requirements, Controls

2.9.3 Blade Size:	Model 32	16.25 (41.3 cm) - Qty. 2
	Model 36	18.00 (45.7 cm) - Qty. 2
	Model 48	16.25 (41.3 cm) - Qty. 3

2.9.4Type of Drive: Manual engagement of belt with over-center lock. Blade belt tension is adjustable via turnbuckle.

2.9.5Blade Brake: When the blade engagement control is moved to the disengaged position a friction brake pad stops the rotation of the blades.

2.9.6Deck Mounting: Bolted directly to engine deck

2.9.7Cutting Height: Adjusts in 1/4" (.64 cm) or smaller increments by various adjustments of caster spacers, blade spacers and axle height, from 1” to 4 1/4” (2.5 cm - 10.8 cm).

2.10DIMENSIONS

2.10.1 Overall Width		32"	36"	48”
	Discharge chute down	43.3 in (110.0 cm)	47.0 in (119.4 cm)	57.9 in (147.1 cm)
	Discharge chute up	32.7 in (83.1 cm)	36.4 in (92.5 cm)	48.1 in (122.2 cm)
	(transport only)

2.10.2 Overall Length		32"	36"	48”
	Standard Pistol Grip Handles	78.0 in (198.1 cm)	78.0 in (198.1 cm)	73.0 in (185.4 cm)
	ECS Handles	77.3 in (196.3 cm)	77.3 in (196.3 cm)	72.3 in (183.6 cm)

2.10.3 Curb Weight∗		32"	36"
	Standard Pistol Grip Handles	420 lbs (191 kg)	430 lbs (195 kg)
	ECS Handles	435 lbs (197 kg)	446 lbs (202 kg)

∗Weights will vary slightly depending on engine option.

2.10.4 Tread Width∗∗		32"	36"
	Standard Pistol Grip &	32.1 in (81.4 cm)	35.6 in (90.4 cm)
	ECS Handles
	∗∗ To outside of tires.

48”

475 lbs (215 kg)

490 lbs (222 kg)

48”

35.6 in (90.4 cm)

2.10.5 Overall Height

Standard Pistol Grip Handles	40.0 in (101.6 cm)
ECS Handles	42.1 in (106.9 cm)

2.11 TORQUE REQUIREMENTS

BOLT LOCATION	TORQUE
Blade/Cutter Housing Spindle Bolt	75-80 ft-lbs. (102-109 N-m)
Caster Bracket Mounts	30-35 ft-lbs. (41-48 N-m)
Mower Deck/Engine Deck Mount	30-35 ft-lbs. (41-48 N-m)
Engine Mounting Bolts	15-20 ft-lbs. (20-27 N-m)
Transmission Shifter Lever Nut	30-35 ft-lbs. (41-48 N-m)

3.OPERATION INSTRUCTIONS

3.1CONTROLS

3.1.1Familiarize yourself with the controls and operation of the unit.

Carefully read the following information about the controls and their operation.

3.1.2Operator Presence Control (OPC) Levers:

Located on the upper handle assembly directly above the handle grips. When these levers are depressed, the OPC system senses that the operator is in the normal operator's position. When the levers are released, the OPC system senses that the operator has moved from the normal operating position and

-10 -