Manuals / Exmark / Lawn and Garden / Lawn Mower

Exmark Lazer ZXS manual Danger, Transporting

Models: Lazer ZXS

1 44

Download 44 pages 10.43 Kb

Page 21

3.4TRANSPORTING

DANGER

POTENTIAL HAZARD

♦An uncovered discharge opening will allow objects to be thrown in an operator’s or bystander’s direction. Also, contact with the blade could occur.

WHAT CAN HAPPEN

♦Thrown objects or blade contact can cause serious injury or death.

HOW TO AVOID THE HAZARD

♦Never operate the mower with the discharge deflector raised, removed, or altered unless there is a grass collection system or mulch kit in place and working properly.

Be sure that all persons are clear of mower deck and discharge area before engaging the blades. Set throttle to "midway" (half throttle) position. Push the PTO lever forward to engage blades. Accelerate to full throttle to begin mowing. (See Section 3.1.5).

3.3.8PTO Disengagement

Pull the blade engagement lever to the full rearward position to disengage the blades (See Section 3.1.5)

3.3.9Changing Gears

When changing gears, always squeeze drive levers to the neutral position. The shift lever may be moved with a knee or by hand (engage the neutral lock latches if shifting by hand).

NOTE: Reverse gear is reverse assist only, the operator must pull the unit backwards.

3.4TRANSPORTING

WARNING

POTENTIAL HAZARD

♦Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

♦The ramps could collapse causing the unit to fall, which could cause injury.

HOW TO AVOID THE HAZARD

♦Use proper ramps that are secured to the truck or trailer.

♦Keep feet and legs out from under the unit when loading and unloading.

♦If necessary, use assistance when loading.

Be sure fuel shut-off valve is closed.

Use a heavy duty trailer to transport the machine. Engage the park brakes and block wheels. After the wheels have been properly blocked, securely fasten the machine to the trailer with straps, chains, cables, or ropes. Be sure that the trailer has all necessary lighting and marking as required by law and use a safety chain.

NOTE: When transporting machine, be sure to engage the park brakes. Failure to do so can result in damage and/or premature wear to drive train.

Do not rely solely on the parking brake to hold machine on trailer.

- 16 -

Image 21

Exmark Lazer ZXS manual Danger, Transporting, Do not rely solely on the parking brake to hold machine on trailer

Contents

Part No. 103-9911 Rev. A For Serial Nos 600,000 & HigherPage EXMARK PARTS PLUS→ PROGRAM EFFECTIVE DATE September 1 ProgramHow the Program Works OPERATORS MANUAL 1. SAFETY TABLE OF CONTENTS2. SPECIFICATIONS 4. MAINTENANCE & ADJUSTMENTS1.1 SAFETY ALERT SYMBOL 1. SAFETYATTENTION! BECOME ALERT YOUR SAFETY IS INVOLVED 1.2 TRAININGDANGER 1.4 OPERATION DANGERDANGER a Before checking, cleaning, or working on the mower 1.4.5 Use EXTREME caution when backing up. LOOK BEHIND YOUc Before making height adjustments c When parking inside a building1.5 MAINTENANCE AND STORAGE 1.7 SAFETY SIGNS1.6 RIDING ATTACHMENTS LOCATION 32” & 36” Decks Under HousingLOCATION 48” Decks Under Belt Shield Belt ShieldLOCATION Upper Handles Both Sides ECS Handle Units LOCATION Right Rear of Engine Deck Pistol Grip Handle UnitsLOCATION Console Pistol Grip Handle Units LOCATION Console2.4 SAFETY INTERLOCK SYSTEM 2. SPECIFICATIONS2.1 MODEL NUMBER 2.2 ENGINE2.10 DIMENSIONS 3. OPERATION INSTRUCTIONS2.11 TORQUE REQUIREMENTS 3.1 CONTROLSApply parking brakes whenever leaving the operators position PISTOL GRIP HANDLE NEUTRAL LOCK/PARK BRAKE LATCHECS HANDLE NEUTRAL LOCK/PARK BRAKE LATCH 3.2 PRE-START 3.3 OPERATING INSTRUCTIONS NOTE Kawasaki engines generally need to be choked even when warmDRIVE LEVER, NEUTRAL LOCK/PARK BRAKE OPERATION DANGER ab cdDRIVE LEVER, NEUTRAL LOCK/PARK BRAKE LATCH OPERATION DANGER 3.4 TRANSPORTINGDo not rely solely on the parking brake to hold machine on trailer 4. MAINTENANCE AND ADJUSTMENTS 4.1 PERIODIC MAINTENANCEService Interval See Engine Owners Manual BLADE BOLT INSTALLATION Service Interval DailyService Interval Daily 102-115 N-mService Interval Daily For Pistol Grip HandlesPISTOL GRIP HANDLES DRIVE LEVER HARDWARE LOCATION ECS HANDLE DRIVE LEVER SETTING PISTOL GRIP HANDLES NEUTRAL LOCK LEVER CLEARANCEFor ECS Handles Service Interval Daily ECS HANDLE DRIVE LEVER LINKAGE INSTALLATIONService Interval See Engine Owners Manual Service Interval See Engine Owners ManualService Interval 160 hrs Service Interval 40 hrsService Interval Refer to Chart SPRAY LUBRICANT CHART LUBRICATION CHARTService Interval As Required Service Interval See Engine Owners Manual4.2 ADJUSTMENTS CASTER HEIGHT ADJUSTMENT AXLE CUTTING HEIGHT ADJUSTMENT 1 to 4 1/4NUMBER OF 1/4 BLADE SPACERS BELOW SPINDLE48” Deck Shown for Reference Only MOWER DECK BELT ADJUSTMENTBLADE BRAKE ADJUSTMENT 3-5 mmNOTE These drawings are viewed from underneath the engine deck SHIFTER LEVER TO TRANSMISSION 5. WASTE DISPOSAL 6. TROUBLE SHOOTINGUPPER HANDLE HEIGHT ADJUSTMENT DRIVE BELT TENSION ADJUSTMENT POSITIONS6.3 BLADES DO NOT STOP WHEN DISENGAGED ENGINE TROUBLESHOOTINGNote Different pressures may make mower cut unevenly 6.2 MOWER CUTS UNEVENLYENGINE TROUBLESHOOTING TABLE 8. WIRING DIAGRAM7. MOWER DECK BELT ROUTING 32 and 36 MOWER DECKInstructions for Obtaining Warranty Service 9.2-Year Limited Warranty Exmark Turf EquipmentConditions and Products Covered Items and Conditions Not CoveredManufacturer’s Warranty Coverage 10. Evaporative Emission Control Warranty StatementOwner’s Warranty Responsibilities Defects Warranty RequirementsPage Page Service Done By SERVICE RECORDDate Description of Work DoneS L O P E T H I S I S AT H I S I S A 1 0 S L O P E FOLD ALONG APPROPRIATE LINESEE EXMARK’S COMPLETE LINE OF ACCESSORIES RIDING ACCESSORIESWALK BEHIND ACCESSORIES