Extreme Networks 300-2 manual Installation of Optional Spacer

Hardware Installation

The universal mounting bracket has mounting holes that allow it to be installed inline with the T-Bar as shown in Figure 6 or at right angles to the T-Bar.

Some hanging ceilings have tiles with bottom surfaces that hang bellow the bottom of the T-Bar. For these ceilings spacers are provided. The spacers go between the T-Bar fasteners and the universal mounting bracket as shown in Figure 7.

Downward face of the T-Bar

Optional spacer

Figure 7: Installation of Optional Spacer

NOTE

Use a small piece of tape to hold the spacer in place on the universal mounting bracket and install the spacer and the bracket together.

Altitude 300-2™ Getting Started Guide 25