Hardware Installation
Optional Plastic Cover
The plastic cover is used with either the Altitude 300-2i™or Altitude 300-2d™. Plastic covers are optional and are ordered with the plastic cover kit. The cover is installed on the Altitude 300-2™after all cable connections and antenna adjustments are made and after the unit is locked or secured. To install the plastic cover place it directly over the box and line up the antenna slots in the cover with the antenna tubes on the box. While gently pulling out on the sides of the case where the clips are, press the cover firmly on to the box. The installer should hear and feel the cover snap into position.
Mount the bracket, and connect the
padlock and any cables before installing
the plastic cover
Gently pull out on the sides of the plastic cover as it is installed on the box
Figure 10: Plastic Cover Installation
Altitude 300-2™ Getting Started Guide | 27 |
