Extron electronic MPS 601 manual Power and Input, Output, Wiring, Rgbhv video inputs Two

Models: MPS 601

1 55
Download 55 pages 56.42 Kb
Page 11
Image 11

Power and Input

AAC power — Connect to standard AC power: 100 to 240 VAC, at 50 or 60 Hz.

 

ATTENTION:

DC Power Cord

Always use a power supply provided by or specified

Captive Screw

by Extron. Use of an unauthorized power supply

Connector

 

voids all regulatory compliance certification and may

 

cause damage to the supply and the end product.

3/16"

Unless otherwise stated, the AC/DC adapters are

(5 mm) Max.

not suitable for use in air handling spaces or in wall

 

 

cavities. The power supply is to be located within

+12 VDC

the same vicinity as the Extron AV processing

equipment in an ordinary location, Pollution Degree

Ground

 

 

2, secured to the equipment rack within the

 

dedicated closet, podium, or desk.

External

The installation must always be in accordance

Power Supply

(12 VDC, 1 A )

with the applicable provisions of National Electrical

AC Power Cord

Code ANSI/NFPA 70, article 725 and the Canadian

 

Figure 3. Power Supply

Electrical Code part 1, section 16. The power supply

shall not be permanently fixed to building structure

Wiring

or similar structure.

 

BRGBHV video inputs — Two

female 15-pin HD connectors for VGA input (numbered 1 and 2 on the rear panel). The connectors accept analog VGA signals.

NOTE: The MPS 601 digitizes the RGBHV input signal. It does not scale or convert

video to a different resolution. The output signal resolution is the same as the input resolution.

CAnalog audio inputs — Two female 3.5 mm TRS connectors. By default, input A is associated with RGBHV video input 1, and input B is associated with RGBHV video input 2. The analog input signal is digitized and embedded onto the HDMI output.

For additional audio input switching modes see Audio Features on page 12.

DHDMI video inputs — Four female HDMI connectors for HDMI compliant audio and video input (numbered 3 through 6 on the rear panel). Connect to any HDMI source device using standard HDMI cables.

Output

EHDMI video output — Connect an HDMI display device for output from the selected input.

MPS 601 • Installation

5

Page 11
Image 11
Extron electronic MPS 601 manual Power and Input, Output, Wiring, Rgbhv video inputs Two