![](/images/new-backgrounds/1109241/10924169x1.webp)
Starting the Software
Open the Product Configuration Software program from the Start menu or desktop shortcut. The software window opens with the Connect to Online Device tab open.
NOTE: The Start New Device File, which starts the PCS program in emulate mode, is not functional for the MPS 601. Always use the Connect to Online Device tab to connect.
Figure 19. Device Selection Window
Connect to Online Device
The Connect to the Online Device tab connects the software to a specified device.
1.Click the Connect to Online Device tab.
2.From the Select Connection Option: panel, select one of the following to choose the connection option:
•RS232 — Select the
Configure the port using the
NOTE: The default settings are shown.
•USB — Select the USB radio button if the device is connected to the host device with the front panel
NOTE: Although the Ethernet option is listed, the MPS 601 does not have an
Ethernet port to support connection.
3.Click Connect. The configuration page opens (see Using the Software on page 30) and the device is ready for configuration.
MPS 601 • Software Configuration and Control | 29 |