Extron electronic MPS 601 manual Audio Features, Mode 1 Default, Media Presentation

HDCP

The HDMI group is HDCP compliant. When EDID Minder is enabled (default), HDCP is not supported if adapters are used to provide DVI inputs.

HDCP communication occurs between the selected input source and the output device directly (pass-though).

Audio Features

There are three audio modes to customize switching the digital and analog audio inputs to the output. They are selectable using SIS commands (see Audio input mode on page 24) or the PCS configuation software (see Audio Config Page on page 39). The modes are:

Mode 1 (Default)

When each RGBHV input has an associated audio input, the associated audio input follows the selected input.

•Audio input A follows input 1 (yellow box in figure 14, below).

Input 1 selected: RGBHV 1 video and audio input A switch to the HDMI output.

•Audio input B follows input 2 (green box in figure 14, below).

Input 2 selected: RGBHV 2 video and audio input B switch to the HDMI output.

•Inputs 3 through 6 selected: the associated embedded audio switches to the output.

Laptop with			Laptop with
HDMI Output			HDMI Output
HDMI
Laptop with VGA Output						Flat Panel Display with Speakers
						Extron
Audio				HDMI	HDMI
						MPS 601
						Media Presentation
RGBHV						Switcher
MPS 601	1			INPUTS	OUTPUT
		A
			3	5	HDMI	C G T	C G T C	G T	+V
POWER
						1	3	5
12V	RGBHV					CONTACT IN / TALLY OUT			REMOTE
0.5A MAX
	2		4 HDMI	6 HDMI
						2	4	6	RS-232
PC with VGA Output		B				C G T C G T C G T Tx Rx G
RGBHV				HDMI
Audio
Blu-ray Player				Laptop with
	HDMI			HDMI Output

Figure 14. Audio Mode 1 Switching (Default)

MPS 601 • Operation 12