Audio Config Page
The MPS 601 audio inputs have three modes that switch the active digital and analog audio inputs to the output.
Figure 31. Audio Configuration
Audio Configuration
Mode 1 (default) – The associated audio input follows the selected input.
•Audio input A follows input 1.
When input 1 is selected, RGBHV 1 video and audio input A are routed to the HDMI output.
•Audio input B follows input 2.
When input 2 is selected, RGBHV 2 video and audio input B are routed to the HDMI output.
•When inputs 3, 4, 5, or 6 are selected, the embedded audio of the selected input is routed to the HDMI output.
Mode 2 – Audio input A is grouped with the analog inputs.
•When input 1 or input 2 is selected, video from the selected input and audio from audio input A is routed to the HDMI output.
•Audio input B is disabled.
•When inputs 3, 4, 5, or 6 are selected, the selected HDMI video and embedded audio is routed to the HDMI output.
Mode 3 – Audio input A is grouped with inputs 1, 3, and 5. Audio input B is grouped with inputs 2, 4, and 6.
•When input 1 is selected, the selected video and audio input A are routed to the output.
•When input 2 is selected, the selected video and audio input B are routed to the output.
•When input 3 or input 5 is selected, the selected HDMI video signal is routed to the output. If embedded digital audio is present on the HDMI input, it is routed to the output. If no digital audio is present, audio input A is routed to the output.
•When input 4 or input 6 is selected, the selected HDMI video signal is routed to the HDMI output. If embedded digital audio is present on the selected HDMI input, it is routed to the output. If no digital audio is present, audio input B is routed to the output.
MPS 601 • Software Configuration and Control | 39 |
