![](/images/new-backgrounds/1109241/109241103x1.webp)
Through-desk Mounting
Mount the switcher through a desk or podium as follows:
1.Attach the mounting brackets to the switcher with the machine screws provided.
2.Cut the proper sized hole in the mounting
surface.
3.Hold the switcher with the attached brackets against the underside of the table or other furniture. Mark the location of the screw holes of the bracket on the mounting surface.
4. Drill 3/32 inch (2 mm) diameter pilot holes, 1/4 inch (6.4 mm) deep in the mounting surface at the marked screw locations.
5. Insert four #8 wood screws through the bracket and into the four pilot holes. Tighten all four screws to secure the switcher in place.
MPS 601 • Reference Information | 46 |