Extron electronic MPX 866 A manual Example 7 Saving a global preset, Computer/Audio

Example 7: Saving a global preset

In the following example, the current configuration is saved as a preset. The steps show the front panel indications that result from your action.

1.Clear all selections: Press and release the Esc button. The button flashes once.

2.Select Save Preset mode: Press and hold the Preset button for approximately 2 seconds until it blinks.

Press and hold the Preset button until the Preset LED blinks.

Release the

Preset button. 2 seconds

All input and output LEDs with assigned presets light. If you then save the configuration to a lit preset number,

the configuration data at that preset location will be overwritten.

PRESET	PRESET	1	2	3	4
			COMPUTER/AUDIO
		Preset 15	Preset 16	Preset 17	Preset 18
		Lit =		Unlit =
		Preset Assigned		Preset Unassigned

3.Select the preset: Press and release the input button for the desired preset.

Press and release the Computer Output 1 button.

The LED blinks to indicate that this preset number is selected but not saved.

CONTROL

1	2	3	4	ENTER	PRESET	VIEW	ESC
	COMPUTER/AUDIO
				The Enter LED blinks to indicate
Preset 15	Preset 16	Preset 17	Preset 18
				the need to save the preset.
				The Preset LED continues to blink.

4.Confirm the change: Press and release the Enter button. The current configuration is now stored in the selected memory location.

Press the Enter button to save the preset.

CONTROL

ENTER PRESET VIEW ESC

The Enter and Preset LEDs return to the unlit state.

All input LEDs return to the unlit state.

MPX 866 A Media Presentation Matrix Switcher • Operation 37