Extron electronic MPX 866 A manual Example 1, final configuration

The current configuration is now input 5 video and audio tied to output 3, output 4, and output 6 (see figure 12).

Input

5

3

4 Output

6

Video

Audio

Figure 12. Example 1, final configuration

Example 2: Adding a tie to a set of computer video and audio ties

In the following example, a new video tie is added to the current configuration. The steps show the front panel indications that result from your action.

NOTE: This example assumes that you have performed example 1.

1.Clear all selections: Press and release the Esc button. The LED flashes once.

2.Select video only for the tie: If necessary, press and release the Video button and the

Audio button.

I/O

VIDEO AUDIO

Press the Video button to toggle on and off. The LED lights when selected.

Press the Audio button to toggle on and off. The LED is unlit when deselected.

3.Select an input: Press and release the input 5 button.

Press and release the Computer Input 5 button. The LED lights.

COMPUTER INPUTS

3 4 5 6

The Computer/Audio Output 3, Output 4, and Output 6 LEDs light to indicate the computer video ties created in example 1.

1 2 3 4 5 6

COMPUTER/AUDIO OUTPUTS

4.Select the output: Press and release the output 1 button.

Press and release the Computer/Audio Output 1 button. The LED blinks to indicate that the selected computer video input will be tied to this output.

1 2 3 4 5 6

COMPUTER/AUDIO OUTPUTS

ENTER PRESET

The Enter LED blinks to indicate the need to confirm the change.

MPX 866 A Media Presentation Matrix Switcher • Operation 26